Product Overview
150 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 150 PSIg Stainless Sensor, Connector, Pins & 1/8" NPT to -4 AdapterGauge style (PSIg) Pressure SensorsAEM offers high quality stainless steel PSIg sensors in 100, 150, 500, 1,000, and 2,000. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig. Gauge style pressure sensors are commonly used for oil pressure, fuel pressure, brake pressure, nitrous pressure etc.Which Pressure Sensor is right for you?There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:Brass Pressure Sensor = RulerUse a Brass Pressure Gauge Sensor where you need a good reference to what pressure is being seen.Example: Brass Pressure Sensor used for a Boost Gauge - Reference/Information for knowing manifold pressure, not for ECU calibration.Stainless Steel Pressure Sensor = CaliperUse a SS Pressure Sensor where you need exact details of the pressure.Example: MAP Sensor information for the ECU - Calibration/crucial information for the ECU.
WarrantyInstallation Instructions
Datasheet
- High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)
- Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
- Analog Data Scaled in Charts
- Connector and pins included
Key Specs
| Translation missing: en.slp_pdp.manufacturer | AEM |
|---|---|
| Translation missing: en.slp_pdp.part_number | 30-2130-150 |
| Translation missing: en.slp_pdp.category | Gauges |
Translation missing: en.slp_pdp.specs_note
Essential Installation & Fitment Notes
- Verify the exact vehicle application and manufacturer part number before ordering.
- Engine swaps, transmission changes and other modifications require an individual fitment check.
- Confirm required supporting parts with our team.
- Installation labor is separate unless explicitly included.
Translation missing: en.slp_pdp.fitment_limitations
Translation missing: en.slp_pdp.empty_fitment
Professional installation is recommended. Contact our team with your vehicle, part number and current modifications for installation availability and required supporting components.
Qualifying installation work carries a 12-month/12,000-mile workmanship warranty on work performed. This is separate from any manufacturer product warranty and does not cover racing-induced engine failures.
Manufacturer warranty terms vary by product. Contact our team for the applicable terms before ordering. Our installation workmanship warranty does not cover product purchases or manufacturer defects.
Translation missing: en.slp_pdp.empty_contents
Translation missing: en.slp_pdp.empty_reviews
