Product Overview
Glass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Catalytic Convertors: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Removal: Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Titanium Exhaust Pipe Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields.
Material Safety Data SheetInstallation Instructions
Installation Instructions
Material Safety Data Sheet
- Withstands 1200 Degrees F Direct/2000 Degrees F Radiant
- Reduce Under Hood Temperatures a Realistic 50 Percent
- Decreases Exhaust Density And Increases Exhaust Flow
- Only Exhaust Wrap With Installation Guide Lines
- Added Durability And Heat Retention
- Improves Horsepower
Key Specs
| Translation missing: en.slp_pdp.manufacturer | DEI |
|---|---|
| Translation missing: en.slp_pdp.part_number | 10121 |
| Translation missing: en.slp_pdp.category | Exhaust Wrap |
Translation missing: en.slp_pdp.specs_note
Essential Installation & Fitment Notes
- Verify the exact vehicle application and manufacturer part number before ordering.
- Engine swaps, transmission changes and other modifications require an individual fitment check.
- Confirm required supporting parts with our team.
- Installation labor is separate unless explicitly included.
Translation missing: en.slp_pdp.fitment_limitations
Translation missing: en.slp_pdp.empty_fitment
Professional installation is recommended. Contact our team with your vehicle, part number and current modifications for installation availability and required supporting components.
Qualifying installation work carries a 12-month/12,000-mile workmanship warranty on work performed. This is separate from any manufacturer product warranty and does not cover racing-induced engine failures.
Manufacturer warranty terms vary by product. Contact our team for the applicable terms before ordering. Our installation workmanship warranty does not cover product purchases or manufacturer defects.
Translation missing: en.slp_pdp.empty_contents
Translation missing: en.slp_pdp.empty_reviews
